300TV-SP Mining Slurry Pump Vertical Single Stage Suction
- The pump has a single shell structure, light weight, small size,
easy installation and maintenance.
- The 300TV-SP(R) mud pumps are heavy, vertical, centrifugal and can
work in sinks and pools.
- The material of flow passing parts is based on different
characteristics of different pulp in industrial field, and selects
suitable corrosion resistant and corrosion resistant materials:
- Cr26, Cr27, Cr28, Cr30, Cr30A, C15MO3, CD4MCu.
- Structure characteristics:
- The submerged slurry pump is a vertical single stage single suction
cantilever centrifugal pump structure. The pump body is submerged
in the liquid to be transported, so no water injection is started,
and the suction problem is solved. The lower part of the liquid has
no seal and no bearing, and overcomes the shortcomings of the old
liquid pump sealing, short bearing life and heavy maintenance work.
- Impeller is half open impeller, in the impeller suction side
extension is equipped with mixing blades, work in reflux, mixing,
mechanical broken, to prevent congestion. Impeller front and rear
cover with blades to reduce leakage, balance axial force, improve
the service life and reliability of the pump. The inlet of the pump
is immersed in the liquid, the outlet is tangential and vertical
upward, and the pump rotates clockwise from the driving end.
- The impeller of the liquid slag pump is provided with an anti
reversal device, so as to prevent the impeller from damaging and
the motor. Petroleum drilling engineering slurry will be used to
supply mud mud centrifuge, or city in piling engineering slurry
will be used to vibration sieve through horizontal directional,
desander and desilter mud supply.
- The bearing body adopts grease lubrication, and the oiling capacity
is within the range of 1/2-2/3 of the space of the bearing chamber.
The bearings are installed in the enclosed bearing chamber, and the
bearings are sealed with oil seals outside to prevent dust.
- The liquid slurry pump is mainly characterized in that the pump
shaft at the lower part of the liquid has enough rigidity, and the
impeller is not provided with bearings between the pump shells, and
the shaft seal can not be used to transport the medium containing
large concentration of solid particles;
- The clearance between the impeller and the sheath and between the
impeller and the guard plate can be adjusted to maintain high
efficiency. The utility model has the advantages of maintenance
free, high temperature resistance, long service life, simple
structure, reliable operation, etc..
- Used in mining, metallurgy, chemical industry, printing and dyeing
and other municipal buildings, pumping sand, mud mud flow is small.
Waste liquid with corrosion; can also be used for rural river pond,
mud fluid, feces, pulp beverage suction; can also be used for city
underground factory conveying liquid sand, yellow sand and mud
|Type||Allowable Mating Max. Power(Kw)||Range Of Performance||Impeller|
|Capacity/Q||Head/m||Speed/rpm||Max Efficiency/%||No. of Vanes||Impeller Diameter/mm|